Product Catalogue: Timber Flooring

Boral Parquetry


Boral parquetry is supplied in the popular block parquetry style. Block parquetry can be laid in any pattern using contrasting coloured timbers to create depth in the design. Blocks of timber are manufactured and then laid individually to create the chosen pattern. There are many popular patterns in Boral block parquetry. Alternatively, custom patterns or feature blocks can be created.

Available in these Colours:


26_Tallowood.jpg Tallowwood
28_TP_pq_170.jpg Turpentine
390_Blackbutt.jpg Blackbutt
393_grey_IB.jpg Grey Ironbark
396_newengland.jpg New England ...
398_SG_Aust.jpg Spotted Gum
400_sydneybluegum.jpg Sydney Blue ...
401_TasOak.jpg Tasmanian Oak
402_Turpentine.jpg Turpentine

    Features & Benefits

  • Parquetry is an extremely durable floor covering making it the perfect solution for heavy traffic areas such as halls, steps, entrance ways and even commercial interiors
  • Boral Parquetry can be laid down in countless patterns, limited only by the imagination
  • Should a small section be seriously damaged, it can be easily replaced. After years of wear the entire floor can be restored by sanding and refinishing.
  • The natural insulation properties of timber lock out winter's cold and summer's heat
  • It is an excellent option for allergy sufferers because timber floors do not harbour dust mites and other allergens
  • Blackbutt and Spotted Gum have a natural fire resistance. Their fire retarding properties, make them suitable for use in many bushfire prone areas under Australian Standard AS3959.
  • Timber is one of the world’s few truly renewable resources
  • Building a sustainable future - Boral Timber hardwoods have full Chain of Custody certification aligned with the Australian Forestry Standard (AFS)

State

NSW, 
ACT, 
QLD, 
SA, 
TAS, 
VIC, 
WA

Product Range

Timber Flooring

Installation Method

glued over concrete slab, 
glued over old timber flooring, 
glued over plywood subfloor, 
glued over particleboard subfloor

Flooring Types 

Parquetry

Board Thickness

18mm


Note: The availability of some species is state specific and not all species are available in all grades. Some additional species may be available on request.


Installation Requirements

Parquetry should be glued directly onto a level subfloor such as concrete, plywood, particleboard or an existing timber floor.


 Boral Timber Flooring recommends that an experienced professional timber flooring contractor handles the installation as well as the sanding and finishing of a new hardwood timber floor. Ask a local timber flooring retailer for a recommended contractor.


 Timber flooring is not recommended for bathrooms, laundries or other wet areas

 For further information on installation see the Boral Timber Flooring and Decking Installation Guide.


Parquetry Flooring Laying Patterns

Abbot Parquetry Laying Pattern Basketweave Parquetry Laying Pattern Brickbond Parquetry Laying Pattern
Abbot Basketweave Brickbond
Heritage Parquetry Laying Pattern Single Herringbone Parquetry Laying Pattern Square on Square Parquetry Laying Pattern
Heritage Herringbone Square on Square



Underlays

Underlays provide floor levelling, cushioning and acoustic properties.

Boral Timber has a variety of quality underlays, such as Boral 2mm and 4mm Underlay that can be installed with a Parquetry timber floor to provide a range of quality flooring solutions.

Technical Specification and Features of Underlay;

• High quality closed cell cross-linked polyolefin plastic foam.
• 1m wide supplied in lengths of 20m and 50m
• 50m roll incorporates moisture barrier plastic film
• 115kpa resistance to water
• 0.0133 mg/N.s water vapour transmission
• Supplied with double sided tape
• Excellent tensile and compression strength
• Absorbs subfloor unevenness
• Light weight and easy to install


Grades available

Boral Timber Flooring meets Australian Standards and uses the aesthetic Boral Timber grading system. Grading is distinguished by selective gum veins, spirals, burls, insect trails and other natural features that give timber floors a unique character, as individual as a signature. Boral Timber Flooring is not graded for colour variation or grain patterns as they form part of the natural beauty of timber flooring.


 Classic Grade is a subtle feature grade of timber flooring that provides a limited level of natural features. The lower levels of natural feature present the floor with a uniform look that is best suited to modern, minimalist styles.


Natural Grade is Boral Timber’s rustic grade displaying a high level of natural features. This grade offers a unique, aged look with extenuated natural features and is well suited to both commercial interiors and traditional decors.


Sustainability
Boral Timber solid products are AFS Chain of Custody certified to (AS4707-2006). This provides peace of mind that Boral’s solid timber products are sourced from sustainably managed and legal forestry. The certification is linked to the largest forest management certification scheme in the world and is the only forest management certification scheme with an Australian Standard (4708-2007).

Board Widths:


65mm

Grade:


Classic Grade
Natural Grade

Board Lengths:

260mm