Product Catalogue: Timber Flooring

Boral Solid Strip Flooring

Boral tongue and groove solid strip flooring is precision-milled, providing a wear layer that can be refinished many times over, providing a lifetime of enjoyment. It is manufactured with a tongue and groove profile that is also end-matched for a tight board-to-board fit.

Note: The availability of some species is state specific and not all species are available in all sizes and grades. Some additional species may be available on request.

Available in these Colours:

12_AustralianBeech_170.jpg Australian B...
13_Blackbutt_170.jpg Blackbutt
14_Brushbox_170.jpg Brush Box
15_FG_170.jpg Flooded (Ros...
16_FR_swatch.jpg Forest Reds
17_Grey_IB_170.jpg Grey Ironbark
18_Jarrah_170.jpg Jarrah
19_Karri_170.jpg Karri
20_Messmate.jpg Messmate
21_NEO_170.jpg New England ...
22_RedMahog_170.jpg Red Mahogany
23_SG_Classic_170.jpg Spotted Gum
24_Stringybark_170.jpg Stringybark
25_Sydney_SBG.jpg Sydney Blue ...
26_Tallowood.jpg Tallowwood
27_Tas_170.jpg Tasmanian Oak
28_TP_pq_170.jpg Turpentine

    Features & Benefits

  • Boral 19mm solid strip flooring is available in a wide variety of Australian hardwood species with a range of Janka (hardness) ratings. Some species are subject to state availability.
  • The profile consistency across the entire 19mm solid strip flooring range provides mixed board width design options and multi-directional board laying
  • The tongue and groove design includes a structural secret nail pocket designed to seat boards better
  • Blackbutt and Spotted Gum have a natural fire resistance. Their fire retarding properties, make them suitable for use in many bushfire prone areas under Australian Standard AS3959.
  • Boral 19mm solid strip flooring can handle foot traffic as soon as it is laid, allowing for other trades on the job before a final sanding and application of the finish
  • Solid hardwood floors are excellent for asthmatics as they do not harbour dust mites or other allergens
  • A timber sub-floor gives easy access to the underfloor for plumbing or ducted heating, or to repair wiring
  • Timber is one of the world’s few truly renewable resources
  • Building a sustainable future - Boral Timber hardwoods have full Chain of Custody certification aligned with the Australian Forestry Standard (AFS)



Product Range

Timber Flooring

Installation Method

nailed to battens over concrete slab, 
nailed to timber joists over bearers, 
nailed to plywood over concrete or timber joists, 
nailed to old timber strip flooring over joists

Flooring Types 

Solid Strip Flooring

Board Thickness

19mm (180mm is 20.5mm thick)

Note: The availability of some species is state specific and not all species are available in all sizes and grades. Some additional species may be available on request.

Installation Requirements
Boral solid strip flooring has the structural strength to be installed directly onto joists, battens or underply over concrete using secret or top nailing methods.

Boral Timber has produced an installation procedure for secret fixing wide boards, board widths of up to 130mm can be secret nailed into the tongue for a smooth and clean finish. See the Product Installation Guide for further details.

Boral Timber recommends that an experienced professional timber flooring contractor handles the installation as well as the sanding and finishing of a new hardwood timber floor. Ask a local timber flooring retailer for a recommended contractor.

Timber flooring is not recommended for bathrooms, laundries or other wet areas

For further information on installation see the Boral Timber's Product Installation Guide.


Underlays provide floor levelling, cushioning and acoustic properties.

Boral Timber has a variety of quality underlays, such as Boral 2mm and 4mm Underlay that can be installed with a Solid Strip Floor to provide a range of quality flooring solutions.

Technical Specification and Features of Underlay;

• High quality closed cell cross-linked polyolefin plastic foam.
• 1m wide supplied in lengths of 20m and 50m
• 50m roll incorporates moisture barrier plastic film
• 115kpa resistance to water
• 0.0133 mg/N.s water vapour transmission
• Supplied with double sided tape
• Excellent tensile and compression strength
• Absorbs subfloor unevenness
• Light weight and easy to install

Grades available
Boral 19mm solid strip flooring is available in three grades. Boral Timber Flooring meets Australian Standards and uses the aesthetic Boral Timber grading system. Grading is distinguished by selective gum veins, spirals, burls, insect trails and other natural features that give timber floors a unique character, as individual as a signature. Boral Timber Flooring is not graded for colour variation or grainpatterns as they form part of the natural beauty of timber flooring.

Note: not all sizes are available in all grades.

Classic Grade is a subtle feature grade of timber flooring that provides a limited level of natural features. The lower levels of natural feature present the floor with a uniform look that is best suited to modern, minimalist styles.

Australiana Grade is carefully graded to include the most interesting and moderate natural features to enhance the look of a timber floor.

Standard and better is carefully graded to include the most interesting and moderate features of Australiana grade flooring. This grade offers a minimal level of natural features best suited to a modern style

Natural Grade is Boral Timber’s rustic grade displaying a high level of natural features. This grade offers a unique, aged look with extenuated natural features and is well suited to both commercial interiors and traditional decors.

Boral Timber solid products are AFS Chain of Custody certified to (AS4707-2006). This provides peace of mind that Boral’s solid timber products are sourced from sustainably managed and legal forestry. The certification is linked to the largest forest management certification scheme in the world and is the only forest management certification scheme with an Australian Standard (4708-2007).

Board Widths:



Classic Grade
Standard and Better Grade
Australiana Grade
Natural Grade

Board Lengths:

Random Lengths - 900mm to 5700mm