Product Catalogue: Timber Flooring

Boral engineered hardwood flooring


The beauty of solid timber flooring,engineered to perfection


Boral Engineered Flooring brings the sophistication and warmth of real timber to a home in a range of unique Australian hardwood timber species.


Boral Engineered Flooring is designed with a quality multi-layer construction, providing a stable timber floor with easy installation over many surfaces.

Available in these Colours:


3204_Engineered-Blackbutt-1strip-170.png Blackbutt
3205_Engineered-SpottedGum-1strip-170.png Spotted Gum
3206_Engineered-BlueGum-2strip-170.png Sydney Blue ...

    Features & Benefits

  • Available in 134mm 1 strip & 186mm 2 strip boards
  • Low sheen high quality European UV cured acrylic lacquer
  • The 4mm nominal hardwood top layer allows resanding and recoating for a long service life.
  • Available in three beautiful Australian hardwood species
  • No mess and fumes from sanding and finishing
  • Boral Engineered Flooring can be walked on within hours of installation
  • The clear coating highlights the natural colour and timber features.
  • Boral Engineered Flooring can be glued or ‘floated’ over a level subfloor such as a concrete slab, particleboard or plywood see the Boral Engineered Flooring Installation Guide
  • Can be re-sanded, just like traditional timber floors
  • The board has a precision-milled square edge and a 4 side Uniclic profile for a tight board-to-board fit and a smooth consistent finish.
  • Boral Engineered Flooring is ideal for asthmatics and allergy sufferers as it does not harbour dust or allergens
  • Graded to AS2796.2 Standard and better - PEFC Certified

State

NSW, 
ACT, 
QLD, 
SA, 
TAS, 
VIC, 
WA

Product Range

Timber Flooring

Installation Method

glued or 'floated' over concrete slab, 
glued or 'floated' over ceramic tiles, 
glued or 'floated' over vinyl, 
glued or 'floated' over plywood subfloor, 
glued or 'floated' over particleboard subfloor, 
glued or 'floated' over old timber flooring

Flooring Types 

Engineered Flooring

Board Thickness

14mm x 134mm wide, 14mm x 186mm wide

Species and sizes
134 x 14mm is available in
188 x 14mm is available in


Technical Specification

  1 strip 134mm 2 strip 186mm
Box length (mm)* 1820 1820
Area per box (m2) 1.464 2.031
Area per pallet (m2) 112.7 156.4
Number of boxes per pallet 77 77
Boards per box* 6 6
Weight per box 15 15

















*Board lengths include up to 1820mm, including a maximum of four short boards per box ranging from 600mm to 1200mm


Grades available
Grading represents the visual characteristics of the timber and has no influence over structural qualities.

Boral Engineered Flooring is not graded for colour variation or grain patterns as they form part of the natural beauty of hardwood timber flooring.

Boral Engineered Flooring is graded to AS 2796.2 Standard & Better


Installation Requirements
Boral Engineered Flooring can be glued or ‘floated’ over any level subfloor such as a concrete slab, particleboard or plywood sheeting or over old timber floors or tiles.

As with all hardwood timber floors, Boral Engineered Flooring is not recommended for bathrooms, laundries or other wet areas.

For further information on installation see the Boral Engineered Flooring Installation Guide.


Care and Maintenance
Like all timber floors Boral Engineered Flooring will mark and scratch. However, it can be re-coated or re-sanded as required, just like traditional wood flooring in order to maintain your floor;

•  Sweep or vacuum (bristles down) your floor regularly to remove 
   stones and abrasive grit or dirt.
•  Install dirt trapping mats at external entrances.
•  Apply felt floor protectors to the underside of all moving furniture to
   reduce marking or scratching.
•  Damp clean using a barely moist mop. For best results, add one
   capful of Timber Cleaner to your water and towel off any excess
   moisture immediately after damp mopping.

Full Maintenance Instructions can be obtained from your local retailer.


Underlays
Underlays provide floor levelling, cushioning and acoustic properties.
Boral Timber has a variety of quality underlays, such as Boral 2mm and 4mm Underlay that can be installed with an engineered timber floor to provide a range of quality flooring solutions.

Technical Specification and Features of 2mm Underlay;
•  High quality closed cell cross-linked polyolefin plastic foam.
•  1m wide supplied in lengths of 20m and 50m
•  50m roll incorporates moisture barrier plastic film
•  115kpa resistance to water
•  0.0133 mg/N.s water vapour transmission
•  Supplied with double sided tape
•  Excellent tensile and compression strength
•  Absorbs subfloor unevenness
•  Light weight and easy to install

Technical Specification and Features of RV4 4mm Underlay;
•  Manufactured from recycled polyurethane foam granulates and cork, 
   bound with polyurethane,
•  Meets the BCA requirement of Lnw+C of 62 for   acoustic underlays
•  Acoustic rating ISO 140.6, ISO 140.8, AS 717.2-2004
•  Roll width and length 1 metre wide, 20 metres in length
•  Material weight 1.72kg/m2
•  Material density 430kg/m3
•  Tensile strength 0.9N/mm2 - DIN 53 577
•  Elongation at break 25% - DIN 53 571
•  Tension under pressure 0.9N/mm2 - DIN 53 577
•  Temperature resistance -40°C to 115°C
•  Fire Resistance Class B2 - DIN 4102
•  Thermal conductivity 0.12W/mK

Please call Boral Timber on 1800 818 317 for detailed Boral RV4 installation guidelines


Trims and Accessories
A variety of Trims and accessories are availble upon request

Board Widths:


134mm
186mm

Grade:


Standard and Better Grade

Board Lengths:

Box Length 1820mm. Board length range 600mm-1820mm