Product Catalogue: Bricks

Utility Bricks - MaxiLite


With our continual focus on new and innovative products we are proud to introduce MaxiLite (305x90x162mm), our new lightweight 2 course utility brick that makes building easier and more efficient.

This new lightweight brick weights only 4.9 kilos, but is no lightweight performer. It has all the strength and performance qualities of our standard Maxi brick.

Available in these Colours:
1360_Commons-Structural-Utility-Bricks.jpg Utility Bricks

    Features & Benefits
  • LIGHTER - Each MaxiLite is up to 500 grams lighter than our standard Maxibrick
  • SMOOTHER EDGES - The main edges have been smoothed off for more comfortable handling
  • SAVINGS - MaxiLite is cheaper to deliver per truck load
  • SCORED FACE - For easy on-site identification
  • RELIABILITY - Although lighter than our standard Maxi, the new MaxiLite achieves the same level of performance, structural strength and durability
  • EASIER SITE MANAGEMENT - Each pack of MaxiLite is up to 66kg lighter
  • MaxiLite utility bricks are predominantly used for internal walls, for supporting structures, or can be used externally when rendered or painted.
  • Available from 7 convenient locations around Perth metro and Geraldton. Delivery available.

State Availability
WA

Product Range

305 Series 90mm Wide

Grade
General Purpose Structural Brick

 

Product Information  
Work Size 305x90x162
 
Dimensional Category
Dimensional deviation measured over 20 bricks in accordance with Australian/
New Zealand Standard AS/NZS 4456.3, Method of Measurement of Dimensions.
Length ± 100mm, Width ± 50mm, Depth ± 90mm
 		 DW1
Approximate Unit Weight (kg) 4.9
 
Approximate No. per m2 18.5
 
Nominal Wall Surface Density (kg/m2) 105 (130 Rendered one side)
 
No. per pack 132
 
Approximate Pack Weight (kg) 647
 
Pack Dimensions (mm) 920x715x980
 
Characteristic Unconfi ned Compressive Strength (MPa) >12
 
Cold Water Absorption (%) <12
 
Dry Density (kg/m3) >1,100
 
Coeffi cient of Expansion (mm/m) <0.8
 
Durability Class Exp
 
Initial Rate of Absorption (kg/m2/min) <1.8 (on face shell)
 
Liability to Efflorescence Nil to Slight
 
Core Percentage (%) >30       
 

Note: All testing is carried out in accordance with Australian/New Zealand Standards AS/NZS 4456 test methods where
applicable. Testing is carried out by Boral Bricks NATA accredited laboratory. Durability classifi cation based on
product knowledge under local (Perth) climatic condition. This technical information represents average properties
obtained from production lots, and should not be used for specifi cation purposes. Information subject to change
without notice


Please check stock availability before placing an order. Please discuss your requirements, including any special requirements, with a Boral Midland Brick Sales Advisor or Representative on 13 15 40.

Midland Bricks utility bricks' have no guaranteed colour. They may range from cream to a muddy brown. As most utility bricks are used internally or rendered, a consistent colour or texture is neither necessary nor considered during the selection process, with the exception of paint grade bricks where attention is given to texture (smooth with a square aris). The colour and texture of utility bricks do not contribute aesthetically to a finished project. For more information contact Boral Midland Brick or see in store.


Try Boral Sampler NOW!

Brick Size:
305 Series Standard Weight 4.9 kg 18.5 per m² 132 per pack 90-305-162