Plasterboard Specifications

Untitled Document Thermal rating
Under normal ambient temperatures, the “R” values for various thicknesses of plasterboard
are as follows:

10mm: 0.060 m2K/W
13mm: 0.079 m2K/W
16mm: 0.098 m2K/W

For foil backed plasterboard with foil facing an empty wall cavity add the following values
to the above ratings:
20mm min. cavity:  0.58 m2K/W 
>20mm cavity 0.61 m2K/W

Dimensional Stability
Under normal temperature and humidity conditions, plasterboard dimensional properties
are as follows:
  • Thermal Coefficients of Linear Expansion = 16.2x10-6mm/(mm°C) –at temperature
    range 4°C to 38°C
  • Hygrometric Coefficient of Expasnsion = 7.2x10-6mm/mm/%RH – at 5% to 90% RH

Fire Hazard Properties
Early Fire Hazard Indices:
Plasterboard type Ignitability Spread of
Flame
Heat Evolved Smoke
Developed
10mm and 13mm
Standard core
14 0 1 0-1
10mm and 13mm
Wet Area Plasterboard
14 0 2 1
13mm and 16mm
FireSTOP™
13 0 1 2
13mm and 16mm
Wet Area FireSTOP™
14 0 2 1
25mm ShaftLINER™ 14 0 1 2

Cone Calorimeter Testing (ref. Amendment 13 to the BCA)
Plasterboard type  Group
10mm and 13mm Standard core 1
10mm and 13mm Wet Area Plasterboard
1
13mm and 16mm FireSTOP™ 1

Safety and First Aid
Although there are no health hazards known in the normal use and application of plasterboard, the following precautions should be observed:
  • Avoid creating dust when handling plasterboard or mixing plaster products.

  • Reduced sanding by passing a wet sponge over the edge of the finished joints after trowelling.

  • If dry sanding is necessary and dust is created, provide adequate ventilation, wear eye protection and a disposable respiratory mask conforming to Australian/New Zealand Standard AS/NZS 1716:1994 Respiratory Protective Devices

  • Keep all construction materials and tools out of reach of children

  • If plaster compound or dust comes into contact with eyes
    - wash eyes thoroughly with water

  • If plaster compound or dust comes into contact with skin
    - wash skin thoroughly with soap and water

  • If plaster dust is inhaled
    - move to a fresh air environment

  • If plastering compound or dust is ingested
    - drink plenty of water
Refer Material Safety Data Sheets for more information on specific Boral Plasterboard products.

Sizes and Availability
Plasterboard
Type
Edge
Profile
Thickness,
mm
Width,
mm
Lengh, m
Mass,
kg/m2
6.0
5.4
4.8
4.2
3.9
3.6
3.3
3.0
2.7
2.4
FlexiBOARD®
 RE
 6
1200
 
 
 NCT
V
 
 NSWC
 
 
   
 4.10
1350
   
S
             
Standard Core
RE
10
1200
NVQSCT
NVQSCT
NVQSCT
NVQSCT
c
NVQSCT
c
NVQSCT
NVQSCT
NVQSCT
6.80
1350
NVQSCT
QST
NVQSCT
NQSCT
 
NVQSCT
 
NVQSCT
T
T
13
900
   
W
   
W
 
W
     
1200
NVQSWCT
NSCT
NVQSWCT
NQSCT
 
NVQSWCT
 
NVQSWCT
NVQSWCT
NVQSWCT
8.60
1350
   
NVQSWCT
NSCT
 
NVQSWCT
 
NQSWCT
   
SE
10
1200
         
NVC
 
VQ
NVQC
NVQC
6.80
13
1200
         
NVC
 
NVQWC
NVWC
V
8.60
BE
13
1200
         
NC
   
C(2740)
C(2500)
Unispan
RE
10
900
   
W
   
W
 
W
 
W
7.20
1200
NVQSWCT
NVQSWCT
NVQSWCT
NVQSWCT
W
NVQSWCT
W
NQSWCT
W
QW
1350
NVQSWCT
ST
NVQSWCT
NSWCT
 
NVQSWCT
 
NSWTC
 
W
SE
10
900
     
W
W
W
 
W
   
1200
       
W
W
 
W
 
W
Wet Area
RE
10
1200
   
Q
NVQSCT
 
NVQSWCT
 
NVQSWCT
NVQSWCT
NVQSWCT
7.40
1350
 
NVQSCT
 
S
 
NVQSWCT
 
SWT
 
NS
13
1200
         
Q
 
NVQSWCT
NVSCT
 
9.40
Fire Stop™
RE
13
1200
         
NVQSWCT
 
NVQSWCT
NVQSCT
NVQSCT
10.5
16
1200
         
NVQSWCT
 
NVQSWCT
NVQSCT
NVQSWCT
13.0
Wet Area
FireSTOP™
RE
13
1200
         
NVSCT
       
10.5
16
1200
         
NVQSCT
 
ST
ST
 
13.0
SoundSTOP®
RE
10
1200
   
NVSC
   
NVSWC
       
8.20
13
1200
   
T
   
NCT
 
NC
 
ST
11.20
Foil Backed
Board
RE
10
1200
 
C
N
   
NWC
 
W
 
W
6.80
13
1200
   
N
   
NW
 
W
 
W
8.60
ShaftLINER™
BE
25
600
         
NVQSWCT
 
NVQSWCT
   
20.00
     
 
                     

Legend  
Locations: N=NSW, V=VIC&TAS, Q=QLD, S=SA, W=WA, C=ACT, T=NT
Edge profile: RE=Recessed Edge, SE=Square Edge, BE=Bevelled Edge
   
Note  
Product availability should be checked with the local Boral Plasterboard Sales Office as certain products and sizes may only be available on order or in pack lots