Export Compounds and Adhesives

Untitled Document
A range of products specially designed to meet all your plasterboard and interior wall and ceiling fixing needs. With continuous development over the years to keep change with changing requirements, these products give plasterers the quality and versatility needed to achieve a smooth flat surface ready for decoration.


 
 

Stud Adhesive PREMIUM BOND

Boral Stud Adhesive PREMIUM BOND is a rigorously tested superior adhesion formula, blended to provide rapid tack and ease of application.

 
 

Jointing Compounds
The leading gypsum-based setting products designed for taping and basecoating plasterboard joints and angles. Possessing superior joint filling characteristics with smooth flow under trowel and through machine, both offer a strong and durable bond and low shrinkage. BaseCote 45 has a working time of approximately 45 minutes. BaseCote 60 has a working time of approximately 60 minutes. Basecote 90 has a working time of approximately 90 minutes.
 
 
Finishing Compounds
Recognised by the trade as the premium air drying compounds designed for use as a finishing coat over taping and base coats. Products are pre-mixed for immediate use and are designed for hand trowel or machine application. FinalCote is a premium semi-lightweight formulation, TopCote 550 is a premium heavy-bodied formulation and both offer easy sanding to give a smooth finish.
 
 
Plaster Adhesives
Gypsum-based adhesives designed to fix plain and decorative cornices to plasterboard walls and ceilings. With superior initial tack, excellent finishing qualities and durable bond, cornice fixing is a simple task. Cornice Adhesive 45 has a working time of approximately 45 minutes. Cornice Adhesive 60 has a working time of approximately 60 minutes.
 
 
All Purpose Compound
All Purpose Pre Mix is an air drying, vinyl based compound which can be used as a three coat wall jointing system with paper tape. Alternatively it can be used as a second and/or finishing coat over gypsum jointing compounds. All Purpose Pre Mix removes the need for time consuming preparation.
 
 
Wet Area Compounds
The complete acrylic system for jointing and sealing wet area plasterboard in residential buildings. Ready mixed for immediate use, these products conform to the requirements of the Building Code of Australia and Australian Standard 3740. Wet Area Taping Cement is designed for use with reinforcing tape in joints and angles and as a thin coat over other areas. It is packaged in 1.75 kg and 6.4 kg pails. Wet Area Sealant is a flexible gap sealant which compensates for joint movement. It is packaged in 450 g cartridges. Wet Area SealCote is a water resistant coating which gives additional protection against moisture in wet areas. Packaged in 1 litre and 4 litre pails.